Good news,brand new and original MTL838C are sold at our website,please send an email and we will offer the best price for you.

MTL838C product description:

he MTL838C Receiver may be connected to one or two MTL831C Analog Transmitters. It holds the configuration for the transmitters and receives measurement data from up to 32 sensors (16 from each transmitter). The data is then made available via Modbus or for the LLMUX. The MTL838C must be installed in a safe area. However, by using the MTL5553 Isolator/Power Supply, the MTL831C’s may be installed in Zone 0, 1, or 2. The MTL831C can monitor up to 16 inputs from THC or millivolt sources or 2, 3 or 4-wire RTDs. MTL838C Receiver Figure 1.1 - MTL838C Receiver 2 INM MTL838C Rev 4 The MTL838C, MTL5553, and MTL831C are connected by a data highway consisting of a single shielded, twisted-pair cable. The data highway carries both signal and power over distances up to 2km, depending on the application, the cable, and the (noise) environment - see Section 4.4. The data highway cables can be simple twisted-wire pairs or pairs of wire within an IS multicore cable.

Additional documents for the MTL838C are: 

• TSN MTL838C Modbus - Introduction to Modbus 

• INM MTL838C-MBF MTL838C Modbus Implementation 

• INM MTL83xC Modbus - PC Software Manual 

• INM5500 for installation instruction for MTL5553 Isolator/Power Supply module.