Product News

Non-Contact Pepperl+Fuchs UB500-18GM75-I-V15 Ultrasonic Sensor with 4-20 mA Output for Distance, Position, and Level Measurement

News November 19, 2026

Pepperl+Fuchs UB500-18GM75-I-V15 Ultrasonic Sensor with 4-20 mA Output for Non-Contact Distance and Level Measurement

Pepperl+Fuchs UB500-18GM75-I-V15 is an M18 ultrasonic sensor developed for continuous distance measurement where color, contrast, or surface markings make optical detection less suitable. It measures without touching the target and provides an analogue current signal that can be evaluated by a PLC, indicator, recorder, or process controller.

Measurement Window: 30 to 500 mm

The sensor covers a short-range measurement window from approximately 30 mm to 500 mm. Within the programmed range, the measured distance is represented by a 4-20 mA output. The window can be adapted to the application so the control system receives a useful scaled signal rather than the full physical range.

Because ultrasonic sensing evaluates reflected sound, UB500-18GM75-I-V15 can detect many targets that are difficult for conventional photoelectric sensors, including dark objects, transparent materials, or surfaces with changing color. The actual result still depends on target size, angle, surface structure, environmental conditions, and the mounting arrangement.

Practical Features for Installation

Temperature compensation supports stable measurement when the surrounding air temperature changes. The selectable sound-lobe width can help adapt the detection field to narrow spaces or nearby structures. A programming input supports setup of the measurement limits, while the V15 designation identifies the M12 connector arrangement used for wiring.

Typical Application Ideas

Small tank level Container presence Web-loop control Stack height Position monitoring

The UB500-18GM75-I-V15 is often considered for packaging machines, material handling, storage systems, assembly equipment, and small process vessels. When several ultrasonic sensors operate near one another, installation spacing and synchronization requirements should be reviewed to reduce mutual interference.

Confirm These Details Before Ordering

Verify that the required output is 4-20 mA, the measuring window suits the target movement, and the connector is V15. Check target geometry, dead band, mounting thread, cable selection, supply voltage, surrounding obstacles, and the required environmental protection. For replacement projects, keep the full UB500-18GM75-I-V15 designation because nearby UB500 variants may use a switching output or a different connection.

Other hot sales models for your reference.

UB500-18GM75-I-V15, UB500-18GM75-U-V15, UB500-18GM75-E5-V15, UB1000-18GM75-I-V15, UB1000-18GM75-U-V15, UC2000-30GM-IUR2-V15, UC4000-30GM-IUR2-V15, ML100-8-H-350-RT/95/103, NBB4-12GM50-E2, NBB8-18GM50-E2-V1, NJ2-12GM-N, NBN40-U1LK-N0, ENI58IL-S10CA5-0100UD1-RAA, KFD2-UFC-Ex1.D, and KFU8-UFC-Ex1.D.